FAQs

when we CNC cutting circle and quadrangle,the result is wrong?

Q:when we CNC cutting circle and quadrangle,the result is wrong?
The parameters are setting correctly on the program and everything is working, but the real result is not matching with parameters, see below:

 It seems that we have overset on X and Y axis (Y = +20% ; X=-2%); 

ThiA:This problem can be caused by any one of the below issues. 

(1)    The motor pulse value got changed which is the most common issue. This values the customer while trying out the parameters may have changed.
Can you make one squire shape with the pen and paper, 500*500 this is for us to calculate the ratio.

(2)    Motor driver Dip switch setting got changed.

Open the CNC machine central unit and make sure the 2 motor driver(X & Y axis) DIP switch values are set correctly. 2 & 5 should be set ON and 1,3,4,6,7,8 should be set OFF

Call. +86-10-51662600
Email. info@steeltailor.com

Cannes Industrial Park, No.18 Shuang Qiao Dong Lu, Chao Yang District

Beijing ,China. 100121


 

Customer Center