Yeah!LegendB5II CNC table plasma cutting and marking machine

legend B5II CNC plasma cutting machine

Yeah!LegendB5II table plasma cutting machine is an muti-purpose machine. It is easy to deal with multi-processing needs.

LEGEND B5Ⅱtable plasma cutting machine is a superior sheet metal cutting machine, two cutting modes for sheet metal cutting: water jacket and platen cutting.It can cut sheet metal as thin as 0.3mm, as thick as 22mm.

LEGENDB5II CNC marking machine is able to achieve high quality CNC marking function for hard materials to draw lines marking.Compare with the laser,the cost,marking format,process control,and marking depth of Legend B5II CNCtable plasma cutting machine has a distinct advantage.Marking depth adjustable functions to draw lines, the greater the pressure,the depper draw lines.

LegendB5II table plasma cutting machine can also make oxy-fuel cutting. The cutting thickness is from 5mm to 25mm.

LEGEND B5Ⅱis better than most of its competitors, offers two-year warranty. LEGEND B5Ⅱ is able to adapt the needs of high-strength metal working and remains reliable processing quality.

http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

 

How to extent life of CNC table plasma cutting machine cutting torch?

 

 

table plasma cutting machine

CNC table plasma cutting machine match plasma power source than start cutting.A plasma cutter is expensive. So make good maintenance of plasma cutting machine is very important. 

So table plasma cutting machine should be properly used when cutting, and the most important is the maintenance of the torch. CNC plasma cutting machine cutting torch is easily damaged.How to extent life of plasma cutting machine cutting torch? 

1.When CNC table plasma cutting machine electrode is replaced,the metal nozzle pressure cap need to pressed properly.

2.CNC plasma cutting machine cutting conductive connection is loose.Water Leakage tracheal rupture interface will shorten its service life.So plasma cutting machine torch should be regularly checked;

3.If ceramic protective sleeve on CNC table plasma cutting machine cutting torch is damaged, should be replaced in time.

4.Too much water in CNC plasma cutting machine compressed air will damage plasma cutting machine torch.Installation of 1-2 filter will make the water less, which can protect the torch.

5.CNC plasma cutting machine water-cooled torch is better than gas cooled torch.Gas cooled torch current carrying capacity is small.

6.When plasma cutting machine electrode is damage, should be changed in time.

So CNC table plasma cutting machine cutting torch should be made good maintenance.

SteelTailor LegendB5II CNC table plasma cutting machine is an CNC plasma cutting machine with marking function. It is powerful and economical!

Yeah!LegendB5II CNC table plasma cutting and marking machine

 

Why it is important to make maintenance of CNC table plasma cutting machine?

table plasma cutting machine

CNC table plasma cutting machine is one of the most important cutting machine in many factories.Once it is damaged. It affect the production. So it is important to make good maintenance of table plasma cutting machine. 

1.CNC table plasma cutting machine need good radiation. High temperature will damage CNC plasma cutting machine parts easily. So gas and cooling gas need to be checked every day.

2.Table plasma cutting machine consumables should be changed in time.Dont change it until the consumable damaged completely. Once there is problem, we should check the consumables.

3.CNC plasma cutting machine threads, electrodes and nozzles be cleaned usually.Make sure plasma cutting machine parts in good condition and not loose.

SteelTailor LegendB5II CNC table plasma cutting machine

Yeah!LegendB5II CNC table plasma cutting and marking machine

Why CNC table plasma cutting machine is damaged easily ?

table plasma cutting machine

CNC table plasma cutting machine is used in many factories.So we need to pay attention to table plasma cutting machine working environment. Make plasma cutting machine working in the best condition.

  1. CNC table plasma cutting machine long time working.This bring great load to CNC plasma cutting machine system.The long time work will make cutting machine internal temperature too high. Plasma cutting machine components will be damaged easily if working at high temperature for a long time.
  2. Table plasma cutting machine produced many metal dust when cutting metals. The metal dust damaged CNC plasma cutting machine if not cleaned for a long time.
  3. When CNC plasma cutting machine cutting,the physicla movement, vibration and collision wear will bring great damage to the disk.This will internal parts loose, causing the destruction of plasma arc.

SteelTailior LegendB5II CNC table plasma cutting machine is an powerful CNC plasma cutting machine with marking function.

Yeah!LegendB5II CNC table plasma cutting and marking machine

 

How to clean slags produced by CNC table plasma cutting machine?

table plasma cutting machine

CNC table plasma cutting machine cutting metals will produce slags. How to clean it?

  1. Keep CNC plasma cutting machine electric and nozzle in the same circle. It will affect plasma cutting machine gas and arc not in the right place. This reduced table plasma cutting machine cutting ability.
  2. Ensure plasma cutting machine get enough plasma power.The plasma arc power increases,the arc column stretched which increases the temperature. The molten metal will be flowed away easily.
  3. Select appropriate CNC plasma cutting machine gas and flow speed. If the gas flow is too small. The blowing force is not enough. So it will produce slag easily.

CNC table plasma cutting machine cutting quality is evaluated by the width of the notch, the verticality of the notch, the surface roughness of the incision, the depth of the cut, the ablation at the bottom of the incision and the hardness and width of the heat affected zone of the incision.

SteelTailor LegendB5II CNC table plasma cutting machine is an powerful CNC cutting machine with marking function.

Yeah!LegendB5II CNC table plasma cutting and marking machine

How to deal with CNC table plasma cutting machine problems in programming?

table plasma cutting machine

1.CNC table plasma cutting machine program cant be read.

Plamsa cutting machine program naming error. The naming cant be accompanied by Chinese characters.

No two “.” numbers can appear in table plasma cutting machine program name.

CNC cutting machine program name is too long.

U disk contact bad.

2.CNC plasma cutting machine programming software can not be open or open too slow.

Plasma cutting machine software working for long time. It procedures derived too much waste files and should be liquidated or re-installed

Table plasma cutting machine system defects or desktop files opened too much.

3.Some graphics changed color when CNC plasma cutting machine program be put out.It will seriously affect the cutting and damage the work-piece.Plasma cutting machine software output is garbled.Change graphics code manually. If you cannot fix it, you can also write the output again.

4. When programming, we must pay attention to CNC cutting machine sheet size. Unilateral to have 10mm cutting allowance. 

SteelTailor LegendB5II CNC table plasma cutting machine is an powerful CNC plasma cutting machine with marking function.

Yeah!LegendB5II CNC table plasma cutting and marking machine

What’s the future of table plasma cutting machine?

table plasma cutting machine

CNC table plasma cutting machine is a new and high technology which integrates numerical control technology, computer software and hardware technology.What’s the future of CNC plasma cutting machine?

CNC plasma cutting machine,flame cutting machine and laser cutting machine are three main cutting machines in the market. Flame cutting machine cutting precision is  low and has a big deformation.The cutting speed is low.

CNC table plasma cutting machine has a big cutting range. CNC plasma cutting machine can cut almost all the metal and many other materials.The highest cutting speed can up to 10m/min. It is 10 times of flame cutting machine. Plasma cutting machine cutting under water can eliminate the noise , dust, harmful gas and arc.It is good for the the environment and health.With the development of high definition plasma cutting machine, CNC plasma cutting machine will take place of flame cutting machine.

Laser cutting machine is more expensive than CNC table plasma cutting machine.High definition plasma cutting machine cutting effect is the same as laser cutting machine. It’s cost is lower than CNC laser cutting machine.So more factory choose high definition plasma cutting machine instead of CNC laser cutting machine.

Table plasma cutting machine will become more intelligent in the future.

SteelTailor Legend Plus -E table plasma cutting machine with drilling function can match with high definition plasma cutters. The cutting sample is very smooth.

https://www.steeltailor.com/flame-plasma-cutting/table-plasma-cutting-machine-detail.html

Yeah!LegendB5II CNC table plasma cutting and marking machine

Which gas is fit for your table plasma cutting machine?

table plasma cutting machine

Table plasma cutting machine can cut different metals. Plasma cutting machine need different gas to cut different materials. 

1.Table plasma cutting machine match with argon gas.Argon dont react with any metal at high temperatures. Argon plasma arc is very stable. Moreover, table plasma cutting machine nozzle and electrode used have higher service life.Argon plasma arc valtage is low, the cutting ability is limited. Compared with air cutting, its cutting thickness will be reduced by about 25%.In addition,argon plasma arc will make a lot of slags.

2.CNC plasma cutting machine match with oxygen. Oxygen can improve the cutting speed when cutting low carbon steel. When plasma cutting machine stop cutting, it is alike with flame cutting.Oxygen plasma arc make plasma cutting machine cutting speed is faster in high temperatures.CNC cutting machine electrode will be damaged easily. So we need oxidation electrode to prolong electrode life.

3.Plasma cutting machine match with hydrogen.Hydrogen is often used as an auxiliary gas mixed with other gases.Such as the H35 (gas volume fraction of hydrogen is 35%, the other is argon) is one of common gas.The plasma arc cutting ability is the strongest.Metal of more than 70mm thickness, we often use argon + hydrogen as plasma cutting machine cutting gas.

4.CNC cutting machine match with nitrogen. Nitrogen is used as a working gas.Nitrogen plasma arc stability is good and the jet power is higher than argon.So the slag is less than argon. Nitrogen can be used alone and can also be mixed with other gas.Nitrogen is sometimes used as an arc gas for cutting oxygen plasma arc

SteelTailor LegendB5II table plasma cutting machine is an powerful CNC plasma cutting and marking machine.

Yeah!LegendB5II CNC table plasma cutting and marking machine

Why table plasma cutting machine cutting have slags?

table plasma cutting machine

Table plasma cutting machine cutting sample is smooth and have no slags in good condition. If plasma cutting machine cutting oxygen pressure or cutting nozzle fittings discomfort , it will have slags.

  1. Table plasma cutting machine slag in the lower edge.Reason:A.Plasma cutting machine cutting speed is too fast or too low.The nozzle is small. CNC cutting machine cutting oxygen pressure is too low.B. The surface of steel is not clean or oxide corrosion.C. The nozzle is too high from the cutting steel.
  2. CNC plasma cutting machine slag is produced on the cutting section. The reason is alloy content is too high.

SteelTailor table plasma cutting machine is economical CNC plasma cutting machine.

Yeah!LegendB5II CNC table plasma cutting and marking machine

What’s the danger when table plasma cutting machine cutting?

table plasma cutting machine

Table plasma cutting machine is dangerous if operating improperly.What’s the danger when table plasma cutting machine cutting?

  1. Keep away when table plasma cutting machine cutting. When plasma cutting machine cutting, all the person should stand far away. The mars splashed out from the cutting head will hurts people badly
  2. Operator should ware work clothes when operating CNC plasma cutting machines.Clothes with metal or wires are not allowed. CNC cutting machine is working in high pressure electric.It is dangerous if you touch the wires.
  3. Table plasma cutting machine must be installed in accordance with the manufacturer’s procedures and requirements for an electric shock can kill people.
  4. When CNC plasma cutting machine power is switched on, the wires and cables cannot be touched.
  5. Plasma cutting machine should and can only be operated by trained operators.

SteelTailor B5II table plasma cutting machine is an powerful  CNC plasma cutting and marking machine.

Yeah!LegendB5II CNC table plasma cutting and marking machine

 

 

How to improve table plasma cutting machine cutting efficiency ?

table plasma cutting machine

How to improve table plasma cutting machine cutting efficiency ?

  1. When table plasma cutting machine cutting speed improved properly, the cutting quality will be better. The incision is slightly narrow and the surface is more smooth.
  2. When CNC plasma cutting machine cutting speed is very fast, the cutting quality will be reduced.It will cause larger drag.
  3. When plasma cutting machine cutting speed is too low, the incision will be bigger. The slag is not easy to clean.

 

So table plasma cutting machine cutting efficiency is related to the cutting speed.

Yeah!LegendB5II CNC table plasma cutting and marking machine