SteelTailorTM Power Portable CNC cutting machines User's Manual
7.4.3. Procedure
7.4.3.1. Basic operating
【X】SET POSI: You can input the coordinate of X axis of SteelTailor CNC portable Cutting Machine by pressing the key 【X】, and then press【ENTER】to confirm. You can set the coordinate of Y axis of SteelTailor CNC portable Cutting Machine in the same way.
【G】CONTINUE: Automatic Mode. At the situation that the key 【G】 is hold on, the torch will move continuous until you press the corresponding direction keys (arrow keys) again. Or else, the cutting device will comes to a smooth stop when the direction key hold on is released. Keep both of the two direction keys of SteelTailor CNC portable Cutting Machine hold on if you need two axes to move at the same time. Pressing any direction key will make one axis stop, but the current axis continues moving until press this direction key again. Of course, press PAUSE key will stop moving in any situation.
ZOOM: Zoom in shape. Press once, the size of shape will double. You can press three times continuously and the shape can be magnified to eight times;
RESTORE: Come back to normal size.
【F】 FAST SPED: To adjust speed fast and the speed ratio will be transformed between 0 and 100%.
【Y】 AUTO-SPD: To adjust speed automatically. You can press this button to select Auto ratio or Manual ratio: press 【Y】 once, you choose Auto ratio; press 【Y】 again, you choose Manual ratio.
【F+】【F-】 ADD/SUB speed: To adjust the value of speed ratio.
【IGNITION】Strong current control key. You can open Preheat Oxy electromagnetic value of SteelTailor CNC portable Cutting Machine using it.
【PREHEAT】Strong current control key. You can open Preheat Oxy electromagnetic value of SteelTailor CNC portable Cutting Machine using it.
【GAS】Strong current control key. You can open Acetylene (GAS) electromagnetic valve of SteelTailor CNC portable Cutting Machine, referring to M10
【CUTOXY】Strong current control key. You can open CUTOXY electromagnetic valve of SteelTailor CNC portable Cutting Machine, referring to M12
【PIERCE】Strong current control key. You can complete a pierce course, operating as the following step:
Flame cutting: torch up (M72)→open CUTOXY(M12)→Torch down(M73);
Plasma cutting: Execute M07.
[SKILL] This is a very important function, which will be used in PAUSE, BACK, EDGE, and PIERCE etc. Press the key PIERCE to make this work finished perfectly.
【OFF】Strong current control key. Close all strong current outputs;
【S↑】Strong current control key. Hold on: Torch up; Release: Raise stop;
【S↓】Strong current control key. Hold on: Torch down; Release: fall stop;
【↑】【↓】【←】【→】: Direction keys
